MO Series magneto
Fitted to all single cylinder models 1936-58, anti-clockwise rotation with the advance and retard control on the left and the pick-up on the right, which means that the ignition is advanced when the cable is tight. It is not unusual for a different magneto to have been fitted sometimes with a different configuration of the pick-up and ignition control. Remember that left and right are as viewed from the drive end.
Part No. |
Description |
Per |
Model |
Years |
110730 |
Points carrier centre screw | 1 | ||
1932-26 |
Sleeve nut, sprocket to Magdyno | 1 | 1932-36 | |
185015 |
HT lead split copper washer | 1 | ||
189289 |
Bearing, magneto, 13×30 mm | 1 | Old | |
189291 |
Bearing, magneto, points end, 35mm O.D. | 1 | 1936-37 | |
189294 |
Bearing, magneto, points end, 37mm O.D. | 1 | 1938-39 | |
189291 |
Bearing, magneto, points end, 35mm O.D. | 1 | 1940-58 | |
189291 |
Bearing, magneto, drive end, 35mm O.D. | 1 | 1936-37 | |
189294 |
Bearing, magneto, drive end, 37mm O.D. | 1 | 1938-58 | |
189386 |
Woodruff key, slipping clutch hub to armature | 2 | ||
200569 |
Nut dynamo to magneto, screw is 123063 | 1 | ||
410600 |
Acorn nut for pick-up | 1 | ||
451260 |
Brush for magneto pickups | 1 | ||
451323 |
Earth brush, 6mm diameter for 460 380 | 1 | 1936-54 | |
451378 |
Insulating washer for 189 289 bearing | 1 | Old | |
454472 |
Spring, ignition control cable | 1 | ||
454475 |
Rubber boot, ignition control cable | 1 | ||
454492 |
Tab washer, ignition control | 1 | ||
454495 |
Gear for dynamo, 22T | 1 | ||
454496 |
Slip ring | 1 | ||
454694 |
Screw, stepped, end cover fixing | 1 | ||
454969 |
Cable plunger for advance and retard cable | 1 | ||
455190 |
Earth brush, 5 mm diameter for 455 191 | 1 | 1955-58 | |
455191 |
Earth brush holder small, use brush 455 190 | 1 | 1955-58 | |
455347 |
Circlip for flat points cam | 1 | 1936-58 | |
455622 |
Pick-up gasket | 1 | 1936-57 | |
458346 |
Pick-up gasket | 1 | 1958 | |
458658 |
HT lead rubber boot | 1 | ||
460052 |
Points screw lockwasher | 1 | ||
460053 |
Gasket, driven end cover plate | 1 | ||
460061 |
Points cover in steel | 1 | ||
460070 |
Stop bracket or guide for contact breaker | 1 | ||
460055 |
Dynamo strap trunnion | 2 | ||
460056 |
Strap to magneto | 1 | ||
460056S |
Dynamo strap screw | 2 | ||
460056SQ |
Dynamo strap screw, stainless | 2 | ||
460380 |
Earth brush holder for 451 323 brush, large | 1 | 1936-54 | |
463066 |
HT pickup with brush, gasket, HT lead washer and acorn nut | 1 | ||
463075/3 |
Armature shim to increase end float, .003″ | AR | ||
463075/5 |
Armature shim to increase end float, .005″ | AR | ||
463075/10 |
Armature shim to increase end float, .010″ | AR | ||
463109 |
Fibre gear, 58 teeth, wide | 1 | ||
463112 |
Slipping clutch friction disc | 1 | ||
463113 |
Slipping clutch nut lockwasher | 1 | ||
463114 |
Star spring washer, slipping clutch | 1 | ||
463117 |
Nut, slipping clutch to armature | 1 | ||
463121A |
Magneto gear end plate with locator pin | 1 | ||
463334 |
This is the Lucas number for their kit of ‘sundry parts’. This was the only way to obtain the small fastenings. We supply these parts as individual items using a suffix letter for each one. | |||
463334A |
Stepped stud for contact breaker housing | 1 | ||
463334B |
Earth wire holder with grub screw | 1 | ||
463334C |
Pick up retaining screw | 2 | ||
463334CQ |
Pick up retaining screw, stainless | 2 | ||
463334D |
Screw, drive end cover | 5 | ||
463334D |
Screw, contact breaker end cover | 1 | ||
463898 |
Points cover spring clip for LH advance/retard, 1 ½” | 1 | Ariel | |
463899 |
Points cover spring clip for RH advance/retard, 2” | 1 | not Ariel | |
463932 |
Insulating washer for 189 291 & 189 294 bearings | 2 | ||
463989 |
End plate, Magdyno, drive end | 1 | 1938-58 | |
464092 |
Nylon tappet, operates the contacts | 1 | ||
484098 |
Contact set | 1 | ||
493180 |
Points cam, clockwise | 1 | ||
493181 |
Points cam, anti-clockwise | 1 | ||
ELE-62 |
Magneto identification label | 1 | ||
ELE-63 |
Magneto identification label, competition models (in red) | 1 | ||
MAG4 |
Overhauled armature, new condenser and skimmed earth surface EXCHANGE Lucas 464 205 | 1 | ||
TOOL-23 |
Timing disc, for accurate valve and ignition timing |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk