Remote Float Carburetter
PART No |
DESCRIPTION |
MODEL |
4/042 |
Main jet | All |
4/060 |
Split pin, retaining cable to slide (it’s the little bits that make the difference) | All |
4/061/108 |
Needle jet, .108 | Not 89/289 |
4/230 |
Needle clip | All |
4/235 |
Cap retaining spring clip, for top with adjuster | Not 89/289 |
4/241 |
Screw for cap retaining spring clip | All |
4/263 |
Spring, throttle (includes some 76, see also 29/047) | 274/75/275/276 |
4/276 |
Cap retaining spring clip, for top without adjuster | Not 89/289 |
5/045 |
Air slide (choke) | 5/75/275 |
5/047 |
Air slide guide tube | 75/275 |
5/047 |
Guide tube for air slide | 75/275 |
5/052/3 |
Throttle slide, No. 3 cutaway | 75/275 |
5/052/4 |
Throttle slide, No. 4 cutaway | 75/275 |
5/065 |
Taper needle | 75/275 |
5/077 |
Cable adjuster lock nut (adjuster is 4/035) | All |
6/031 |
Top ring for mixing chamber | 76/276 |
6/032 |
Mixing chamber top | 76/276 |
6/033 |
Union nut, shallow, see also 6/062 M20/21 1940-54 & B31/32 1949-54 | 76/276 |
6/038 |
Bellmouth | 76/276 |
6/045 |
Air slide | 76/276 |
6/047 |
Guide tube for air slide | 76/276 |
6/052/3 |
Throttle slide No. 3 cutaway | 76/276 |
6/052/4 |
Throttle slide No. 4 cutaway | 76/276 |
6/062 |
Union nut, deep, see also 6/033 All models except those listed under 6/033 | 76/276 |
6/065 |
Needle | 76/276 |
64/156B |
Float chamber | 1950 A7 |
13/129 |
Pilot air screw | 6 |
14/015 |
Float, bottom feed chambers (see 14/304) | 6 |
14/021 |
Float chamber lid lock bolt | 6 |
14/024 |
Float needle, all large (1 7/8″) bottom feed float chambers (see 14/304) | 6 |
14/026 |
Spigot for petrol pipe | 6 |
14/030 |
Float needle, all large (1 7/8″) top feed float chambers except 2DX & 2EX | 6 |
14/032 |
Tickler spring | 6 |
14/035 |
Fuel banjo, single, threaded | 6 |
14/035 |
Fuel banjo, single inlet, threaded 1/4 BSP | 6 |
14/036 |
Union nut, holds banjo to base of float chamber | 6 |
14/042 |
Gland nut 1/4 B.S.P. for petrol taps, threaded banjos, ukuleles etc | 6 |
14/043 |
Fuel banjo, double inlet, 90 degree, not threaded | 6 |
14/173 |
Fuel banjo, double inlet, 180 degree, threaded 1/4 BSP | 6 |
14/208 |
Float chamber lid with fittings, bottom feed | 6 |
14/209 |
Tickler button | 6 |
14/210 |
Tickler bush | 6 |
14/289 |
Tickler split pin | 6 |
14/301 |
Tickler complete | 6 |
14/304 |
Float and needle assembly (replaces 14/015 and 14/024 | 6 Bottom feed |
16/010 |
Nut, locking idle screw 4/063 | 6 |
29/041 |
Top ring, retaining mixing chamber cap | 89/289 |
29/047 |
Spring, throttle slide (see also 4/263) | Most 76/289 |
29/048 |
Bellmouth, chrome, small | 89/289 |
29/055 |
Air valve (choke slide) | 89/289 |
29/057 |
Guide tube, air valve | 89/289 |
29/062/3 |
Throttle valve No. 3 cutaway | 89/289 |
29/062/35 |
Throttle valve No. 3 1/2 cutaway | 89/289 |
29/062/4 |
Throttle valve No. 4 cutaway | 89/289 |
29/075 |
Needle | 89/289 |
29/076/105 |
Needle jet, standard | 89/289 |
29/076/105 |
Needle jet, .105 | 89/289 |
29/076/106 |
Needle jet, .106, standard | 89/289 |
29/076/107 |
Needle jet, .107 | 89/289 |
29/077 |
Banjo bolt, float chamber to mixing chamber | 89/289 |
29/078 |
Mixing chamber union nut | 89/289 |
29/201 |
Cap spring for carburettor. top with throttle cable adjuster | 89/289 |
29/301 |
Cap spring for carburettor top without throttle cable adjuster | 89/289 |
64/353 |
Drain screw for float chamber, large ¼” | 1950-54 |
229/300 |
Bellmouth, chrome, large | 89/289 |
RES170 |
To bore out body and hard chrome plate the slide – see note at start of this section |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk