Tools and Toolboxes
PART No |
DESCRIPTION |
MODEL |
YEARS |
Genuine ex-factory tools |
|||
PACK-START-001 |
Starter toolkit pack | A | All |
61-3670 |
Valve guide tool, part of 61-3267 (stepped disc) | M | |
66-9052 |
Hub adjusting sleeve spanner | M | 1938-63 |
1-3051 |
Double ended spanner, 1/8, 3/16, 1/4, 5/16 | All | 1933-50 |
24-8957 |
Tommy bar for box spanners | All | 1902-72 |
66-9067 |
Hub spindle box spanner, 7/16 x 1/2 | M | 1938-55 |
Other Tools – Quite Essential |
|||
61-3005 |
Tool for fitting and removing fork oil seal holders | A/B/M/C pre unit | 1947-62 |
67-9114 |
Comb for aligning push rods | A | 1950-62 |
61-1903 |
Extractor for Magneto pinion (manual advance) | A/B/C/M | all |
61-3362 |
Clutch extractor, 6 spring clutch Not 1938-53 C Group | A/B/C/M | 1949-62 |
61-3706 |
Clutch nut screwdriver for those funny nuts with the stud through the middle | ||
61-3760 |
Clutch tool, locks centre to outer, Triumph type clutch | ||
61-3766 |
Clutch extractor, 4 spring | A | 1961-62 |
61-1912 |
Clutch extractor, single spring & 6 Spring | M / C | 1937-48 / 1938-53 |
61-3222 |
Plunger suspension fitting and removing tool | Plunger | |
61-3306 |
Single spring clutch – spring compressor | M | 1937-48 |
Other Tools – Useful |
|||
29-9252 |
Tyre lever, spoon type | 1938-60 | |
61-3350 |
Tool for pulling fork stanchion through yokes, includes adapters for most stations | 1946-72 | |
61-3694 |
Peg spanner for wheel bearing lock rings | ||
6688-93 |
Spanner set, 8 Whitworth combination (ring and open end), 1/8 to 9/16 | ||
6689-95 |
Socket set, 8 Whitworth 1/2″ drive sockets, 3/16 to 5/8 | ||
6625-88 |
Thread file for restoring any external thread (BSF/CEI/WHIT) | ||
61-3063 |
Head race cup extractor – 1/4 ball head races 1-1/2 x 24tpi | B & M | |
29-9257 |
Box spanner – clutch centre nut | C | 1954-57 |
A18-91 |
Spragging tool for slipping clutch on Magdyno as shown in Lucas manuals | ||
A48-92/93/94 |
Really good cable oiler | ||
68-9462 |
‘C’ spanner for adjusting our replacement rear shock absorbers and many others | ||
A63-95 |
Tapered pin for lining up engine bolt holes | ||
A72-99 |
Spoke spanner fits 6 sizes of nipples | ||
6625-99 |
Basic tap and die set, | ||
Tool-41 |
Posh tap and die set, | ||
A64-96 |
Universal engine stand. Holds almost any engine while it is worked on. | ||
60-1859 |
Ignition timing tool, 1969-72 UNC | ||
A67-97 |
TDC tool, graduated plunger, fits in spark plug hole to locate top dead centre and piston position when doing the timing. Beats a bit of wire with pencil marks on it! | ||
A17-90 |
Fork stanchion puller upper. Improved design and cheaper, includes adapters for Ariel and BSA forks | ||
A73 |
Reynolds type chain breaker | ||
6636-29 |
14″ of metal cased replica tyre pump, excellent quality, as original | ||
90-9237 |
12″ of metal cased replica tyre pump, excellent quality, as original | A7/10 | 1960-62 |
6692-90 |
Wellseal, gasket cement, 100ml. Large tube that lasts ages – highly recommended | ||
6692-37 |
Hylomar gasket goo, recommended for use with paper gaskets. | ||
6692-89 |
RTV Silicone gasket goo, clear. For those difficult joints. | ||
Toolboxes |
|||
6554-41 |
Toolbox with hinged lid, British standard triangular shape. | ||
Made to a very high quality by a British craftsman in bare steel (the toolbox, not Dave). A bracket is fitted on the bottom that will usually fit onto a pillion footrest mount or similar, no other mounting holes are provided so that it can be drilled to suit your own mountings. |
|||
6557-47 |
Tool box knob, bottle top type, suitable for the above | ||
65-9080 |
Toolbox | A/B Rig | 1949-57 |
65-9080 |
Toolbox | A Plun | 1949 |
67-9002 |
Toolbox | A Plun | 1952-57 |
42-9262 |
Toolbox | A Sarm, TT carb | 1960-62 |
42-9189 |
Toolbox | A Sarm | 1958-59 |
67-9002A |
Tool box lid only | A Plun | 1952-57 |
29-9132 |
Tool box lid screw | A/B Rig/Plun | 1947-57 |
24-8928 |
Tool box clip | B/M Plug | 1949-63 |
66-9127 |
Toolbox | WM20 | 1940-45 |
29-9132 |
Tool box knob | C10/10L/11/11G | 1946-57 |
27-9001 |
Tool box fixing clip | B Rig | 1940 |
27-9001 |
Tool box fixing clip | M Rig | 1940-55 |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk