Oil Tank

What Oil Should I Use? On the subject of oil, we recommend that engines with roller bearing big ends are run on monograde oils i.e. single viscosity sae 40 in winter and sae 50 in summer. This is because this type of oil can withstand the high loads experienced in a roller bearing big end where all the force is through just one or two rollers. Monograde oils should not be confused with ‘straight oil’, which means oil without additives. The principal additive in modern oils is a detergent that is used to keep deposits in suspension until they reach the oil filter. They will also loosen existing deposits and as there is no effective filter this can be disastrous in an engine that is full of ‘gunge’ accumulated over the years.

Engines with shell bearing big ends can use either a monograde or a modern multi-grade oil. The multi-grade oil will lubricate the shells more quickly when the engine is first started which is when most of the wear takes place and so is more suitable for short journeys; it is also cheaper and more easily obtainable. Monograde oil will leak less; the engine will run cooler and quieter, is available as a straight oil and is more original!

Do not forget to clean out the oil tank when rebuilding the engine.

Picture Number

Part Number

Description

Per

Model Name

1

68-9337

Pop rivet for oddie clip 2 All

2

65-0292

Bolt, rear chainguard 1 All

3

68-8317

Spacer 1 All

4

68-8334

Oil tank rubber 1 All

5

02-0923

Washer 1 All

6

36-0382

5/16 IntShakeproof washer 1 Spitfire, Hornet & Wasp

7

02-0049

Standard nut, 5/16X26 1 All

8

68-8378U

Oil Tank 1 All

9

67-0042

Fibre washer 1 All

10

68-8368

Oil tank cap 1 All

11

68-8386

Oil Tank 1 Hornet (West U.S.A.)

12

68-8396

Distance Piece 1 Hornet (West U.S.A.)

13

40-8402

Grommet 1 Hornet (West U.S.A.)

14

68-8395

Bracket 1 Hornet (West U.S.A.)

15

15-5155

Washer Handle bar clip bar end 1 Hornet (West U.S.A.)

16

24-7148

Bolt 1 Hornet (West U.S.A.)

16

24-7148

Bolt 1 Hornet (West U.S.A.)

17

76-8010

Washer 1 Hornet (West U.S.A.)

18

40-6022

Chainwheel bolts 1 Hornet (West U.S.A.)

19

21-5102

Standard nut, 1/4X26 2 All

20

90-3064

Swivel for clamp 2 All

21

42-2860

Silencer clamp 2 All

22

90-3063

Pin for clamp 2 All

23

S1-2

Standard nut, 1/4X26 4 All

24

02-1462

Spring washer, 1/4 4 All

25

68-2781

Silencer bracket Left Hand 1 All

25

68-2780

Silencer bracket Right Hand 1 All

26

02-0204

Bolt 1/4CEIx5/8 4 All

27

68-2733

Silencer 2 All (Not Spitfire) USA MODEL

27

68-2785

Silencer 2 Spitfire

27

68-2732

Silencer 2 LSTR

27

68-2732P

Silencer, not 100% right shape, cheaper! 2 LSTR

28

68-9134

Tool Pouch 1 All

29

68-9131

Toolbox 1 All

30

68-8343

Clip 2 All

31

68-8342

Oil feed pipe 2 All

31

68-8383

Oil pipe 1 All

31

68-8399

Oil Pipe (Return) 1 Hornet (West U.S.A.)

32

68-8328

Oil filter 1 All

33

68-8336

Fibre Washer 1 All

34

68-9115

Oddie clip 1 All

35

02-0204

Bolt 2 All

36

02-1462

Spring washer, 1/4 2 All

37

S1-2

Standard nut, 1/4X26 2 All

38

S1-2

Standard nut, 1/4X26 1 All

39

02-1462

Spring washer, 1/4 1 All

40

68-9401

Heat sink 1 All

41

68-9106

Zener diode bracket 1 All

68-4802

Footrest Left Hand 1 All

62-0263

Clip (oil pipe) 2 All

90-6018

Rivet 1 All

No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk