Monobloc Carburetter
Click here to view carburetter settings.
Monobloc Carburettor Mono indicates all Monobloc. |
||
Part Number |
Description |
Models |
PACK-ADV-001 |
Monobloc carb overhaul pack | All |
5/047 |
Choke slide guide tube | 375 |
244/765 |
‘O’ ring, flange to cylinder head 1 3/8” OD (either size used on 376) | 375/376 |
244/1048 |
‘O’ ring, flange to cylinder head 1 ½” OD (either size used on 376) | 376/389 |
343/011 |
Tickler body | 375 |
375/064 |
Mixing chamber top, 2 adjuster type | 375 |
375/065 |
Mixing chamber top ring | 375 |
375/066 |
Bellmouth | 375 |
375/099 |
Mixing chamber top, non adjuster type | 375 |
375/107 |
Mixing chamber top, 1 adjuster type | 375 |
376/001 |
Monobloc carburettor body 15/16″ bore | 376 |
376/002 |
Monobloc carburettor body 1″ bore | 376 |
376/003 |
Monobloc carburettor body 1 1/16″ bore | 376 |
376/055 |
Jet block 15/16″ | 376 |
376/056 |
Jet block 1″ | 376 |
376/057 |
Jet block l 1/16″ | 376 |
376/072/1065 |
Needle jet, .1065 | All |
376/073 |
Main jet holder | All |
376/075 |
Main jet cover nut | All |
376/075 |
Main jet cap nut | All |
376/077 |
Float cover | All |
376/077U |
Float cover, overhauled | All |
376/086 |
Tickler button | All |
376/086 |
Tickler button | Mono |
376/088 |
Float needle seating | Mono |
376/089 |
Float needle, ‘Viton’ tipped! Ooooh er! | Mono |
When using a ‘Viton’ tipped float needle, a fibre washer should be fitted under the float needle housing. |
||
376/090 |
Fuel banjo, single inlet, threaded 1/4 BSP | Mono |
376/091 |
Bolt, fuel banjo | Mono |
376/093 |
Petrol filter | Mono |
376/094 |
Float spacer | Mono |
376/095 |
Pilot jet cover nut | Mono |
376/097M |
Fuel banjo, single push on type, metal | Mono |
376/099 |
Carburettor top for 2 mid-adjuster cables | 376 |
376/100 |
Main jet | Mono |
376/108 |
Fuel banjo, 90deg double, threaded | All |
376/139 |
Fuel banjo, double push on type, 150 degree | All |
376/140 |
Extended jet holder for twin carbs | All |
389/066 |
Bellmouth, chrome | 389 |
389/060/3 |
Throttle slide No. 3 cutaway | 389 |
389/060/35 |
Throttle slide No. 3.5 cutaway | 389 |
389/060/4 |
Throttle slide No. 4 cutaway | 389 |
389/061 |
Throttle return spring | 389 |
389/062 |
Air valve (choke slide) | 389 |
389/063 |
Taper needle | 389 |
389/064 |
Mixing chamber top, 2 adjuster type | 389 |
389/065 |
Top cap retaining ring | 389 |
389/099 |
Mixing chamber top, non adjuster type | 389 |
389/107 |
Mixing chamber top, 1 adjuster type | 389 |
RES169 |
To bore out body and hard chrome plate the slide – see note at start of this section |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk