MSL1S & MN1E Magneto

MSL1S fitted to 1936 4F; MN1E fitted to 1937-48 4G. Some parts also suitable for pre-1936 magnetos. See the end of this section for electronic ignition systems.

Part No.	Description	Per	Model	Years
1036-31	Rotor arm	1	4F	1931-35
1038-31	Distributor cap – use one from a MKI Mini and machine down	1	4F	1931-32
1932-26	Sleeve nut, sprocket to armature	1	MS, MN	1936-48
106120	Screw, CB spring to base plate, 6BAx5/32 (shorten 106 130 )	1	MS, MN	1936
106130	Screw, contact breaker spring to fibre heel, 6BAx11/32	1	MS, MN	1936
149010/5	Armature shim to reduce end float .005”	AR	MS, MN	1936-48
149010/10	Armature shim to reduce end float .010”	AR	MS, MN	1936-48
149010/15	Armature shim to reduce end float .015”	AR	MS, MN	1936-48
185015	HT lead split copper washer, pick ups	1	MN	1937-48
185026	Washer, pick up screw	2	MS, MN	1936-48
189291	Bearing, magneto, 35mm O.D	2	MS, MN	1936-40
189294	Bearing, magneto, 37mm O.D.	2	MN	1945-48
189386	Woodruff key	1	MS, MN	1936-48
200569	Nut dynamo to magneto	2	MS, MN	1936-48
400316	Distributor cap	1	MS, MN	1936-48
400316A	Clip for distributor cap	2	MS, MN	1936-48
400316B	Screw for dizzy cover	2	MS, MN	1936-48
404435	Brush for distributor cap	1	MS, MN	1936-48
404449	Rotor arm	1	MS, MN	1936-48
410600	Acorn nuts for pickups etc (holds HT leads)	1	MN	1937-48
451260	Brush for magneto pick-ups	1	MS, MN	1936-48
451321	Pick up with 3 dimples, I think this will fit, it definitely fits the pre 1936 version	1	MS	1936
451323	Earth brush and spring, 6mm diameter for 460 380	1	MS, MN	1936-48
452222	End cap, plastic	1	MS, MN	1936-48
454472	Spring for advance and retard cable	1	MS, MN	1936-48
454475	Rubber boot, advance & retard cable	1	MS, MN	1936-48
454492	Tab washer, advance & retard cable	1	MS, MN	1936-48
454496	Slip ring	1	MS, MN	1936-48
454694	Screw, stepped, end cover fixing	1	MS, MN	1936-48
454969	Cable plunger for advance and retard cable	1	MS, MN	1936-48
455447	Cam ring	1	MS, MN	1936-48
455622	Pick up gasket	1	MN	1937-48
460055	Dynamo strap trunnion	2	MS, MN	1936-48
460056	Strap to magneto	1	MS, MN	1936-48
460056S	Dynamo strap screw	2	MS, MN	1936-48
460056SQ	Dynamo strap screw, stainless	2	MS, MN	1936-48
460380	Earth brush holder for large brush, 451 323	1	MS, MN	1936-48
461435	Fibre gear, 50 teeth, narrow	1	MS	1936
463066	HT pickup with brush and acorn nut	1	MN	1937-48
463075/10	Armature shim to increase end float, .010″	AR	MS, MN	1936-48
463075/5	Armature shim to increase end float, .005″	AR	MS, MN	1936-48
463334	This is the Lucas number for their kit of ‘sundry parts’. This was the only way to obtain the small fastenings. We supply these parts as individual items using a suffix letter for each one.
463334A	Stepped stud for contact breaker plate	1	MS, MN	1936-48
463334B	Earth wire holder with grub screw	1	MS, MN	1936-48
463334C	Pick up retaining screw	2	MS, MN	1936-48
463334CQ	Pick up retaining screw, stainless	2	MS, MN	1936-48
463334D	Screw, drive end cover	4	MS, MN	1936-48
463674	Screw, contact breaker securing (shorten 122 160)	1	MS, MN	1936-48
463932	Bearing insulating washer for 189,291/4 (1″ bore)	2	MS, MN	1936-48
464268	Fibre gear, 50 teeth	1	MN	1937-48
467569	Gear set, pair of worm gears for magneto and distributor	1	MN	1936-48
470537	Contact breaker brush and spring	1	MS, MN	1936-48
470608	Contact set, clockwise	1	MS, MN	1936-48
470688	Points spring, set	1	MS, MN	1936-48
ELE-62	Magneto identification label, with screws	1	MS, MN	1936-48
TOOL-23	Timing disc, for accurate valve and ignition timing
CQB	Our HT lead is ‘Hypalon’ covered and has a copper core. This cable is very flexible and especially suited for high temperature locations. Price is per inch, about 18” per plug is usually sufficient and 78” for Square Fours.
MAG5	Overhauled armature, new condenser and skimmed earth surface EXCHANGE, other types to order	1	MN	1937-48

No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk

MSL1S & MN1E Magneto

Part No.

Description

Per

Model

Years

463334