Handlebar and Controls
The following controls are not as the originals but are offered as suitable replacements as the originals are no longer available. The lever will not fit the Leader due to the closeness of the screen.
There was an export only handlebar listed for Arrows described as ‘American type’, I have never seen one.
Part No | Description | Per | Models |
PACK-START-007 | Control lever pack | A | All |
10/2 | Lever pivot bolt (T1143) | 2 | S,T,G,H |
10/2 | Lever pivot bolt (T1088) | 2 | A,B |
10/3 | Lever pivot bolt locking nut (T1144) or use SP1/4 Nyloc nut | 2 | S,T,G,H |
29-8812 | Front brake lever blade, will fit Leader if shortened (T1141) | 1 | S, T, H |
29-8832 | Clutch lever blade, will fit Leader if shortened (T1142) | 1 | S, T, H |
366/13 | Twist grip assembly, correct small type (T1113) | 1 | A, B |
2096-53 | Fibre washer, handlebar cover screw | 3 | A, B |
6425-1 | Twist grip rubber (T1137) | 1 | A, B, S, T, H |
6425-7/8 | Dummy handlebar grip (T1107) | 1 | A, B, S, T, H |
SN-32 | Handlebar cover middle fixing nut | 3 | A, B |
SP1/4 | Lever pivot bolt locking nut (SN-39) | 2 | A,B |
T1042U | Handlebar | 1 | A, B |
T1077 | Handlebar cover | 1 | A, B |
T1080 | Spacer, handlebar cover | 2 | |
T1081 | Handlebar cover middle fixing screw | 1 | A, B |
T1082 | Fibre washer under handlebar cover screw | 2 | A, B |
T1091 | Screw, handlebar cover | 2 | |
T1126 | Handlebar bracket | 1 | |
T1127 | Handlebar | 1 | S, T, H |
T1128 | Handlebar clamp | 2 | |
T1129 | Handlebar clamp bolt | 4 | |
T1130 | Steering cover | 1 | |
T1139A | Clutch lever assembly | 1 | S, T, H |
T1152 | Throttle and front brake assembly | 1 | S, T, H |
T1166 | Handlebar | 1 | G |
T1167 | Lever blade, ball end RH | 1 | G |
T1168 | Lever blade, ball end LH | 1 | G |
T1377 | Twist grip rubber, original, RH only | 1 | A, B, S, T, H |
T2537 | Grommet – handlebar to front shield | 1 | A, B |
The following controls are not as the originals but are offered as suitable replacements as the originals are no longer available. The lever will not fit the Leader due to the closeness of the screen.
107RH7/8 | Front brake lever assembly | 1 | S, T, H |
107LH7/8 | Clutch lever assembly | 1 | S, T, H |
71 | Twist grip assembly, without rubbers and lever bracket (better to use 366/13) | 1 | S, T, H |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk