Front Fork and Mudguard
The anchor bar arrangement was altered at frame number T17,440 to be attached via an ‘A’ plate instead of directly to the brake plate. This required a different bracket on the main fork assembly and some factory replacement forks have both brackets fitted.
Part No | Description | Per | Models |
Main Fork Parts | |||
PACK-INTER-001 | Fork overhaul pack | A | All |
S5-4 | Shakeproof washer, fork end bolt | 2 | All |
S19-2 | Plain washer, pivot bolt | 2 | All |
S19-2Q | Plain washer, pivot bolt, stainless steel | 2 | All |
SN-37 | Captive nut, fork cover plate | 2 | All |
T1000 | Suspension lever, RH | 1 | All |
T1001 | Suspension lever, LH, pinch bolt type | 1 | All |
T1020 | Mudguard, front section | 1 | All |
T1020U | Front mudguard, front, used | 1 | All |
T1021U | Front mudguard, rear, used | 1 | All |
T1033 | Spring, damper unit | 2 | All |
T1034 | Fork cover, right hand | 1 | All |
T1035 | Fork cover, left hand | 1 | All |
T1040 | Distance piece, between RH suspension lever and wheel spindle | 1 | All |
T1047 | Fork leg assembly, bare, lower anchor bar fixing | 1 | A, S |
T1050 | Bolt for the bottom of the shock absorber | 2 | All |
T1051 | Distance piece, suspension lever, long | 2 | All |
T1052 | Distance piece, suspension lever, short | 2 | All |
T1053 | Bush, suspension lever | 8 | All |
T1054 | Pinch bolt, LH suspension lever | 1 | All |
T1055 | Countersunk screw, fork cover plate | 2 | All |
T1059 | Pivot bolt, suspension lever, RH | 1 | A, S |
T1061/1 | Nut, pivot bolts | 2 | All |
T1061/1 | Locknut, damper top | 2 | All |
T1061/4 | Rubber for damper top, can use 5060-27 | 4 | All |
T1161 | Fork leg assembly, bare, upper anchor bar fixing | 1 | B, T, G, H |
T1125/B | Damper top cover, will require painting | 2 | All |
T2610 | Blanking grommet inside fork leg | 2 | All |
T1061/1 | Locknut, pivot bolt | 2 | All |
UN2/6F | Nut, fork end bolt | 2 | All |
Steering stem | |||
4818-31 | Head race upper cone, on steering stem | 1 | All |
4820-36 | Head race upper cup, in frame | 1 | All |
4835-26 | Nut, adjusting head races on steering stem | 2 | All |
S9-2 | Ball bearing for head races | 43 | All |
T1017 | Dust cover, upper head race | 1 | All |
T1039 | Steering lock fitting on steering stem | 1 | A, B |
T1043 | Head race lower cup, in frame | 1 | All |
T1044 | Head race lower cone, on steering stem | 1 | All |
T1043TR | Fork taper roller kit | 1 | All |
Mudguard and Anchor Bar | |||
S5-2 | Shakeproof washer, mudguard to bracket | 8 | All |
S5-3 | Shakeproof washer, front and rear section of mudguard to steering crown | 1 | All |
S19-2 | Plain washer, mudguard to bracket | 8 | All |
S19-2Q | Plain washer, mudguard to bracket, stainless steel | 8 | All |
SN-34 | Nut, anchor arm bolt, fork end | 1 | All |
SN-37 | Captive nut, mudguard to fork | 8 | All |
T1046 | ‘U’ rubber between mudguard and fork | 2 | All |
T1056 | Ball and bush, anchor bar | 2 | All |
T1154 | ‘A’ plate for anchor bar | 1 | B, T, G, H |
T1156 | Torque arm cover, white, in GRP | 1 | |
T1554 | Anchor bar, straight type | 1 | A, S |
T1564 | Dust cover, anchor bar | 4 | All |
UN1/5F | Nut, front section of mudguard to steering crown | 1 | All |
UN4/8F | Bolt, mudguard to bracket | 8 | All |
UN5/14F | Bolt, front section of mudguard to steering crown | 1 | All |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk