Front Wheel
For anchor bar click here
The hubs were initially made in aluminium with fulcrum brake adjusters as on the four strokes but at frame number approximately T2600A the adjusters were deleted, the brake plate was changed and the shoes were made from steel pressings instead of cast aluminium alloy. At some point the hub material was changed to cast iron. For the 1962 model year the hubs gained cooling fins between the spoke flanges, the brake shoes gained anti squeal springs and the brake plates were enlarged to prevent the ingress of water.
Part No | Description | Per | Models |
– | Parts not Illustrated | – | – |
PACK-START-003 | Wheel bearing pack | A | All |
T1530 | Wedge, fulcrum brake adjuster, alloy shoes | 2 | A, S |
T1532 | Brake adjuster, nylon, alloy shoes | 1 | A, S |
T1588 | Spring, anti squeal, brake shoe to brake plate (1962-65) | 2 | B, T, G, H |
T1520 | Spoke & Nipple 5 3/16x9x90 | 36 | All |
T1520Q | Spoke & nipple 5-3/16x9x90 stainless steel | 36 | All |
T1519 | Wheel rim, WM2 x 16”, Radelli, chrome | 1 | All |
T1519Q | Wheel rim, WM2 x 16”, Stainless steel | 1 | All |
T3624/1S | Tool, front wheel spindle, with drawing | A | All |
TY16-325MCU | Tyre, Mitas H-05, 3.25 x 16 | 1 | All |
TY16-325ZC | Tyre, Metzler ‘Block C’, 3.25 x 16 | 1 | All |
TY-16TRIM | Whitewall tyre trim, easy to fit and very effective, with instructions | 4 | |
TY-16TAPE | Rim tape | 1 | All |
TY-CAP | Tyre valve cap | 1 | All |
MB16 | Inner tube, 3.25 x 16 | 1 | All |
| – | Illustrated Parts | – | – |
4110-26 | Brake shoe return spring | 2 | All |
4118-29 | Washer, brake cam, steel shoes only | 1 | All |
4660-34Q | Washer, brake cam, steel shoes only, stainless steel | 1 | All |
T1501 | Front hub, aluminium, bare | 1 | A |
T1501/U | Front hub, aluminium, bare, used | 1 | A |
T1505 | Brake plate, fulcrum adjuster type, alloy shoes (1959-60) | 1 | A, S |
T1509 | Circlip, wheel bearing | 2 | All |
T1510 | Bearing, sealed type, RH | 1 | All |
T1511 | Bearing, sealed type, LH | 1 | All |
T1513 | Felt washer, left hand | 1 | All |
T1515 | Grease retainer, right hand side | 1 | All |
T1516 | Spindle | 1 | All |
T1517 | Bush between bush in brake plate and spindle, steel | 1 | All |
T1518 | Nut, wheel spindle | 1 | All |
T1522 | Bush in brake plate, bronze | 1 | All |
T1523/1 | Brake cam, steel shoes only, used | 1 | All |
T1528 | Brake arm, cast type. Use 4402-56 and a file | 1 | A, S |
T1528/A | Brake arm, sheet steel type (will fit earlier) | 1 | B, T, G, H |
T1529 | Felt washer | 1 | All |
T1533F | Brake shoes, alloy, pair, EXCHANGE send the old ones to us | 1 | A, S |
T1556 | Grease retainer Left side | 1 | All |
T1557 | Retaining plate, felt | 1 | All |
T1562 | Grease nipple | 2 | |
T1568 | Pivot, steel brake shoes | 1 | B, T, G, H |
T1569 | Brake shoes, steel, pair | 1 | B, T, G, H |
T1570 | Brake plate, chamfered edge, steel shoes (1961) | 1 | B, T, G, H |
T1573U | Hub, cast iron, bare, no ribs (1961) | 1 | B, T, G, H |
T1573/1 | Hub, cast iron, bare, with ribs (1962-65) | 1 | B, T, G, H |
T1587 | Brake plate, water excluding lipped edge (1962-65) | 1 | B, T, G, H |
T1587-Twin | Front brake twin leading shoe assembly | 1 | B, T, G, H |
UN2/5F | Nut, brake arm, 5/16 UNF half | 1 | All |
UN2/5FQ | Nut, stainless, brake arm, 5/16 UNF half | 1 | All |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk