Toolbox & Tools
Part No |
Description |
Per |
Years |
PACK-START-001 |
Starter toolkit pack | A | All |
12832-54 |
Bolt, toolbox to bracket | 2 | 1954-58 |
12244-54 |
Washer, mounting bolt | 3 | |
12152-54 |
Spring washer, mounting bolt | 3 | |
12620-54 |
Nut, mounting bolt | 3 | |
13212-54 |
Toolbox knob | 1 | |
13213-54 |
Nut, toolbox knob | 1 | |
13242-54 |
Tyre inflator, good copy | 1 | |
13232-54 |
Box spanner, clutch centre nut | ||
61-3706 |
Screwdriver for clutch spring nuts | ||
6606-27 |
Copy of Ariel tool kit spanner for steering headrace adjusting nuts, rigid and girder wheel bearing adjusting nuts. etc | ||
6606-30 |
Copy of Ariel tool kit spanner for QD spindle and nut, plunger wheel spindle nuts, full width rear spindle nut left side, rigid & girder wheel bearing adjusting nuts. Etc | ||
6627-46 |
Oil seal holder fitting and removing tool | ||
Useful Tools
Part No. |
Description |
Models |
Years |
6636-29 |
Tyre pump, good quality copy in metal | Rig/Plun | 1929-58 |
6636-54 |
Tyre pump, good quality copy in metal | S/arm | 1954-58 |
6606-27 |
Copy of Ariel tool kit spanner for steering headrace adjusting nuts, rigid and girder wheel bearing adjusting nuts. Etc. 9/16W x 3/4W. Indispensable for the head race nuts. | ||
6606-30 |
Copy of Ariel tool kit spanner for QD spindle & nut, plunger wheel spindle nut, full width rear spindle nut left side, rigid & girder wheel bearing adjusting nuts. Etc. 9/16W x 5/8W | ||
6616-29 |
Screwdriver for clutch spring nuts | ||
6623-48 |
Set pin for 6621-48, supplied with extractor but available separately, genuine Ariel | ||
6649-50 |
Extension tube for box spanner | ||
TOOL-32 |
Tool for pulling fork stanchion through yokes, with adapters to fit all Ariel & BSA stanchions. This tool is our own version of this well known tool that is superior and cheaper! | ||
TOOL-13 |
‘C’ spanner for adjusting our replacement rear shock absorbers and many others | ||
TOOL-15 |
TDC tool, not for side valves (graduated plunger that fits in spark plug hole to position the piston accurately) | ||
TOOL-17 |
Renold’s pattern chain breaker | ||
TOOL-18 |
Piston ring clamp 60-65 mm | ||
TOOL-19 |
Piston ring clamp 65-70 mm | ||
TOOL-20 |
Piston ring clamp 75-80 mm | ||
TOOL-21 |
Piston ring clamp 80-85 mm | ||
Spanners etc.
Part No. |
Description |
Years |
6600-06 |
Classic adjustable spanner 6” long maximum opening .800” | |
6600-07 |
Classic adjustable spanner 7” long maximum opening 1” | |
6688-93 |
Set Whitworth open ended spanners 1/8 to 1/2 | 1898-1958 |
6688-05 |
Set Whitworth combination spanners 3/16 to 1/2 | 1898-1958 |
6689-95 |
8 Whitworth 1/2″ drive sockets, 3/16 to 5/8 | 1898-1958 |
6689-96 |
8 Whitworth 3/8” drive sockets, 3/16 to 5/8 | 1898-1958 |
TOOL-16 |
Spoke key fits 6 sizes of nipple | |
TOOL-25 |
Circlip pliers, internal and external | |
TOOL-27 |
16” tyre lever, get those tyres off | |
Part No. |
Description |
TOOL-52 |
Thread file for restoring any external thread (BSF, CEI, WHIT) |
6636-05 |
Use 21st century technology to inflate tyres with this compact CO2 gas canister and adapter, slip one in the tool kit for those awkward sinking moments |
OI-HYL |
‘Hylomar’ blue gasket goo, recommended for use with paper gaskets |
OI-SIL |
Silicone gasket goo, clear. Sets like rubber, useful for those difficult to seal damaged cases. |
OI-WEL |
‘Wellseal’, gasket cement, 100ml. Use with or without a gasket, expensive but very good, large tube will last for ages, highly recommended. |
TOOL-10/11/12 |
Really good cable oiler. Clamps around cable & oil is injected using a pump oil can commonly known as ‘Wesco’ |
TOOL-23 |
Timing disc |
TOOL-28 |
Crimping tool for fuel pipe ferrules PIP-21 and PIP-22 |
TOOL-24 |
Set of 8 ‘Allen’ key 5/64 to 3/8 |
TOOL-35 |
Trickle charger for batteries 6 and 12 volt, ½ amp |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk