Handlebars and Controls
For control cables click here
The controls that we supply are sold as suitable replacements and not as direct copies of the original, however most are close to and some are identical to the originals. They are all modern replacements and if you are particular about the type please ask; also if the one you require is not listed. The table below gives the best available lever for the job and the table below that describes the levers with additional comments. For some models and years, up to 1949, BSA fitted their own levers known as ‘BSA clamp on type’, these are not listed in the chart although some are available, see the 3rd table down and consult a parts book!
Model | Years | Clutch | Magneto | Brake | Air | Exhaust |
A7 | 1947 | 107LH7/8 | ——- | 107RH7/8 | 100LH1 | ——- |
A7/10 | 1948-55 | 107LH7/8 | ——- | 107RH7/8 | 100RH7/8 | ——- |
A7/10 | 1956-59 | 107LH7/8 | ——- | 108RH | With Brake | ——- |
A7/10 | 1960-62 | 219LH | ——- | 219RH | 100RH7/8 | ——- |
A7ST/SS/A10RR | 1949-59 | 107LH7/8 | 12/569LH | 107RH7/8 | 100RH7/8 | ——- |
A7/10 | 1960-62 | 40-8541 | ——- | 40-8540 | 42-8756* | ——- |
A7SS/10SR | 1960-62 | 42-8780 % | With Clutch + | 40-8540 | 42-8756* | ——- |
A10 Spit | 1960-62 | 42-8781% | With Clutch | 40-8538 | 42-8756* | ——- |
* Air lever on frame; + When fitted; % See notes below | ||||||
B31 | 1946 | 108LH | 12/569LH | 108RH | With Brake | With Clutch |
B31/33 | 1947-55 | 107LH7/8 | 12/569LH | 107RH7/8 | 100RH7/8 | 105/7 |
B31/33 | 1956-57 | 107LH7/8 | 12/569LH | 108RH | With Brake | 105/7 |
B31/33 | 1958-60 | 107LH7/8 | ——- | 108RH | With Brake | 105/7 |
C | 1946-50 | 107LH7/8 | ——- | 107RH7/8 | ——- | ——- |
| C Group lever brackets are part of the handlebars 1951-58 | ||||||
M | 1940-45 | 107LH7/8 | 100LH7/8 | 107RH7/8 | 100RH7/8 | 105/7 |
M | 1946-47 | 107LH7/8 | 100LH7/8 | 107RH7/8 | 100RH7/8 | 105/7 |
M | 1948 | 107LH7/8 | With Exhaust | 107RH7/8 | 100RH7/8 | With Magneto |
| For 1948 only the M group used a combined magneto and exhaust lever! Which is not available. | ||||||
M | 1949-63 | 107LH7/8 | 12/569LH | 107RH7/8 | 100RH7/8 | 105/7 |
Description of Control Levers Listed Above | |
12/569LH | Magneto lever, long arm |
100LH1 | Air lever 1” |
100RH7/8 | Air lever |
105/7 | Exhaust lever, trigger type |
107LH7/8 | Clutch lever, plain, no adjuster and without the switch bracket, pattern, pressed steel blade |
107RH7/8 | Brake lever, plain, no adjuster and without the switch bracket, cheap pattern, pressed steel blade |
108LH | Clutch and magneto lever combined, plain, no adjuster |
108RH | Brake and air lever combined, plain, no adjuster |
42-8781 | Clutch and magneto lever, with 5/16 cam type cable adjuster and ball end lever blade. We will supply separate clutch and magneto levers under this number. |
40-8538 | Brake lever with 5/16 cam type cable adjuster and ball end lever blade |
42-8780 | Clutch and magneto lever, with 5/16 cam type cable adjuster and plain lever blade. We will supply separate clutch and magneto levers under this number. |
40-8540 | Brake lever with 5/16 cam type cable adjuster and plain lever blade |
40-8541 | Clutch lever with 5/16 cam type cable adjuster and plain lever blade |
42-8756 | Air lever mounted on 1 1/8” frame tube. |
Handlebars, Twist Grips and Components for Control Levers | |||
Part No | Description | Model | Years |
PACK-START-007 | Control lever pack | All | All |
10/2 | Pivot screw for brake & clutch levers | ||
10/3 | Pivot screw lock nut, reduced hex, genuine | ||
10/3L | Pivot screw Nyloc nut | ||
16 | Throttle stop ferrule suit 5/16 (8 mm) hole in twistgrip | ||
24-7570 | Brake and air lever combined, genuine BSA ‘clamp on’ type | 1933-49 | |
27-7826 | Clutch lever blade, genuine BSA ‘clamp on’ type | 1936-45 | |
29-8812 | Lever blade only, right hand | C ZC10 12475 → | 1950-58 |
29-8832 | Lever blade only, left hand | C ZC10 12475 → | 1950-58 |
42-4968 | ‘Western’ handlebars (high rise) | A | 1960-62 |
65-4960 | Handlebars | A/B/M except Spitfire | 1948-63 |
65-4960 | Handlebars | C YC411→ ZC10 12475 | 1948-50 |
66-4990 | Handlebars, chromed | M20 | 1940-47 |
66-4990WD | Handlebars, unchromed | WDM20 | |
71 | Twist grip assembly, without grips | A/B/M | 1940-63 |
71 | Twist grip assembly, without grips | C YC411→ | 1948-58 |
71P | Throttle control / Twist grip, 7/8, – pattern type – silver | ||
17/327 | Throttle control / Twist grip, 7/8, – pattern type – black | ||
90-4976 | Handlebars with lugs | C ZC10 12475 → | 1950-58 |
90-8506 | Ferrule for cable into lug | C ZC10 12475 → | 1950-58 |
90-8533 | Twist grip assembly without grips | C10L | 1954-57 |
366 | Throttle stop ferrule suit 1/4 (6.5 mm) hole in twistgrip | ||
1070LH | Lever blade only, LH pressed type | ||
1070RH | Lever blade only, RH pressed type | ||
2070LH | Lever blade only, ball end, LH pressed type | ||
2070RH | Lever blade only, ball end, RH pressed type | ||
6415S-34 | Spring steel washer for air or magneto lever | ||
6425-47 | Handlebar grip, pair nice old style hatched pattern | ||
6430F-39 | Screw, twist grip clamp (2 per) | ||
Other Parts Without Specific BSA Applications | |||
1” Control Levers | |||
61 | Twist grip assembly without grips | ||
100LH1 | Magneto or exhaust lever | ||
100RH1 | Air lever | ||
105/1 | Exhaust lever, trigger type | ||
107CLH1 | Clutch and magneto lever combined | ||
107CRH1 | Brake and air lever combined | ||
107LH1 | Clutch lever, (not combination) | ||
107RH1 | Brake lever, (not combination) | ||
12/569LH1 | Magneto or exhaust lever, long arm | ||
12/569RH1 | Air lever, long arm | ||
6425-33 | Handlebar grip pair, nice old style hatched pattern | ||
Other Parts | |||
12/569RH | Air lever, long arm, 7/8 | ||
16 | Throttle stop ferrule suit 5/16 (8 mm) hole in twistgrip | ||
207LH7/8 | Clutch lever, ball end, no adjuster 7/8 | ||
207RH7/8 | Brake lever, ball end, no adjuster 7/8 | ||
366 | Throttle stop ferrule suit 1/4 (6.5 mm) hole in twistgrip | ||
1070LH | Lever blade only, LH pressed type | ||
1070RH | Lever blade only, RH pressed type | ||
2070LH | Lever blade only, ball end, LH pressed type | ||
2070RH | Lever blade only, ball end, RH pressed type | ||
6425-90/1 | Twist grip rubber, Doherty type, 1″ | ||
6425-90/7 | Twist grip rubber, Doherty type, 7/8″ | ||
AC-27 | Bar end mirror, chrome, flat glass | ||
AC-28 | Bar end mirror Stainless, flat glass | ||
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk