Frame spares & parts for Triumph 1973-85 750 twin models
What Oil Should I Use? On the subject of oil, we recommend that engines with roller bearing big ends are run on monograde oils i.e. single viscosity sae 40 in winter and sae 50 in summer. This is because this type of oil can withstand the high loads experienced in a roller bearing big end where all the force is through just one or two rollers. Monograde oils should not be confused with ‘straight oil’, which means oil without additives. The principal additive in modern oils is a detergent that is used to keep deposits in suspension until they reach the oil filter. They will also loosen existing deposits and as there is no effective filter this can be disastrous in an engine that is full of ‘gunge’ accumulated over the years.
Engines with shell bearing big ends can use either a monograde or a modern multi-grade oil. The multi-grade oil will lubricate the shells more quickly when the engine is first started which is when most of the wear takes place and so is more suitable for short journeys; it is also cheaper and more easily obtainable. Monograde oil will leak less; the engine will run cooler and quieter, is available as a straight oil and is more original!
Do not forget to clean out the oil tank when rebuilding the engine.
Key | Part Number | Description | Per | Models |
NI | PACK-ADV-007 | Oil feed/return pack | A | All |
NI | 60-3361 | “Made in England” transfer, black | 1 | 1973-85 All |
NI | 60-4255 | Rivets, sold each for patent plate | 2 | 1985 T140 |
NI | 60-7168 | Transfer “ratio suppression” | 1 | 1980-83 All |
NI | 62-0068 | VIN plate | 1 | 1985 T140 |
NI | 62-0069 | Transfer ‘E’ mark | 1 | 1985 T140 |
NI | 82-4719 | Shield, front upper part | 4 | 1980 TR7 |
NI | 83-1615 | Clip, D shape breather pipe | 4 | 1979-80 TR7 |
NI | 83-7387 | Crankcase breather pipe | 1 | 1979-80 TR7 |
NI | 97-3894 | Screw | 4 | 1979-80 TR7 |
1 | 83-4753 | Frame | 1 | 1973-75 All |
1 | 83-7032 | Frame | 1 | 1976-78 All |
1 | 83-7236 | Frame | 1 | 1979 All |
1 | 83-7537 | Frame | 1 | 1980-83 All (not TSX) |
1 | 83-8265 | Frame | 1 | 1982-83 TSX |
1 | 84-0001 | Frame | 1 | 1985 T140 |
2 | 71-2744 | Rocker box cap | 1 | 1985 T140 |
2 | 71-3463 | Dip stick, OIF | 1 | 1973-83 All |
3 | 60-3616 | Oil cap ‘O’ ring | 1 | 1973-85 All |
4 | 83-4783 | Oil filter | 1 | 1973-83 All |
5 | 71-3316 | Sump plate | 1 | 1973-82 All (not TSS & TSX) |
5 | 71-7584 | Sump plate | 1 | 1982-83 TSS & TSX |
6 | 83-2829 | Gasket, oil filter plate | 2 | 1973-83 All |
7 | 60-2330 | 5/16 washer | 4 | 1973-83 All |
8 | 21-2025 | Stud 5/16×1 1/4 UNF/ UNC | 4 | 1973-77 (not later models) |
8 | 21-2109 | Stud, seat fixing | 4 | 1976-77 (later models), 1978-83 All |
9 | 14-1302 | Locking nut, 5/16 UNF | 4 | 1973-83 All |
10 | 21-1872 | Timing hole plug UNC | 1 | 1982-83 TSS & TSX |
10 | 82-5343 | Plug 3/8 CEI26 | 1 | 1973-82 All (not TSS & TSX) |
11 | 37-3761 | ‘O’ ring – brake tappet | 1 | 1982-83 TSS |
11 | 70-1335 | Sealing washer | 1 | 1973-83 All (not TSS) |
12 | 71-3478 | Oil junction block | 1 | 1973-77 (not later models) |
12 | 71-7013 | Oil block | 1 | 1976-77 (later models), 1978 All |
12 | 71-7176 | Oil junction block | 1 | 1979-83 All |
13 | 71-3754 | Gasket, oil pipes | 1 | 1973-83 All |
14 | 21-1908 | Nut, 1/4UNF reduced hex | 1 | 1973-83 All |
15 | 70-3446 | Washer, Engine mount rear | 1 | 1973-83 All |
16 | 71-3550 | Rocker oil feed pipe | 1 | 1973-85 All (not TSS) |
16 | 71-7458 | Rocker oil pipe | 1 | 1982-83 TSS |
17 | 70-1335 | Sealing washer | 4 | 1973-83 All |
18 | 21-0550 | Domed nut, 3/8 UNF | 2 | 1973-83 All |
19 | 71-3551 | Rocker feed pipe | 1 | 1973-83 All (not TSS) |
19 | 71-7662 | Rocker feed pipe | 1 | 1982-83 TSS |
20 | 70-6848 | Oil Feed pipe clip | 2 | 1973-83 All |
21 | 71-2345 | Oil return pipe | 1 | 1973-78 All |
21 | 71-7058 | Oil return pipe | 1 | 1979-81 All |
22 | 60-4429 | Hose clip | 1 | 1982-83 All |
22 | 70-6848 | Oil Feed pipe clip | 1 | 1973-81 All |
23 | 60-4428 | Hose clip | 1 | 1982-83 All |
23 | 82-9073 | Oil pipe clip | 1 | 1973-81 All |
24 | 71-3450 | Oil feed pipe | 1 | 1973-77 (not later models) |
24 | 71-7015 | Oil feed pipe | 1 | 1976-77 (later models), 1978-83 All |
24 | 83-7536 | Oil feed pipe | 1 | 1980 T140D |
25 | 71-2349 | Breather pipe, 42″ | 1 | 1973-78 All |
25 | 83-7154 | Oil tank vent pipe | 1 | 1979-83 All (not TSS) |
25 | 83-8274 | Oil tank vent pipe | 1 | 1982-83 TSS |
26 | 71-1149 | Breather pipe | 1 | 1973 All |
26 | 83-5285 | Breather pipe, front, ‘D’ section, grey | 1 | 1974-78 All |
27 | 83-4813 | Grey breather pipe | 1 | 1973-78 All |
28 | 83-1610 | T piece | 1 | 1973 All |
28 | 83-5290 | ‘T’ piece | 1 | 1974-78 All |
29 | 60-2252 | Pipe clip | 2 | 1974-78 All |
29 | 60-2253 | Clip | 2 | 1973 All |
30 | 60-2252 | Pipe clip | 1 | 1973-78 All |
31 | 83-1615 | Clip, D shape breather pipe | 4 | 1973-78 All |
32 | 97-3894 | Screw | 4 | 1973-77 All |
33 | 82-4717 | 2BA lock nut | 4 | 1973-77 All |
34 | 83-4615 | Centre stand | 1 | 1973-77 (not later models) |
34 | 83-4941 | Centre stand | 1 | 1976-77 (later models), 1978-79 All |
34 | 83-7532 | Centre stand | 1 | 1980 TR7 & T140E, 1981-85 All |
34 | 83-7338 | Centre stand | 1 | T140D |
35 | 83-3793 | Spring centre stand | 1 | 1973-85 All |
36 | 14-0147 | Set screw, 1/2 UNF x 1-1/4 | 2 | 1980-85 All |
36 | 21-2077 | Centre stand bolt | 2 | 1973-79 All |
37 | 14-1304 | Nyloc nut, 7/16 UNF | 2 | 1973-79 All |
37 | 14-1305 | Nyloc nut, 1/2 UNF | 2 | 1980-85 All |
38 | 83-1560 | Prop stand leg | 1 | 1973-79 All |
38 | 83-7421 | Prop stand | 1 | 1980 T140D |
38 | 83-7553 | Side stand | 1 | 1980 TR7 & T140E, 1981-85 All |
39 | 82-7021 | Prop stand bolt, shouldered | 1 | 1973-85 All |
40 | 14-1303 | 3/8 UNF Nyloc nut | 1 | 1973-85 All |
41 | 82-8382 | Spring | 1 | 1973-85 All |
42 | 57-2331 | Rubber, centre stand | 1 | 1976-77 (later models), 1978-85 All |
43 | 14-0114 | Bolt 5/16 x 3/4 UNF | 1 | 1973-79 All |
44 | 14-0402 | Half nut 5/16 UNF | 1 | 1973-79 All |
45 | 60-4428 | Hose clip | 1 | 1976-77 (later models), 1978 All, 1982-83 All |
45 | 70-6848 | Oil Feed pipe clip | 1 | 1973-77 (not later models), 1979 All, 1980-81 All |
46 | 60-4429 | Hose clip | 1 | 1976-77 (later models), 1978 All, 1982-83 All |
46 | 82-9073 | Oil pipe clip | 1 | 1973-77 (not later models), 1979-81 All |
47 | 83-7069 | Clip | 1 | 1976-77 (later models), 1978 All |
48 | 83-7323 | Breather pipe | 1 | 1979-80 T140, 1981-83 All |
49 | 83-7145 | Breather tower | 1 | 1979-80 T140 |
49 | 83-7703 | Breather tower | 1 | 1981-83 All (not TSS) |
49 | 83-8018 | Breather tower | 1 | 1982-83 TSS |
50 | 83-7148 | Breather banjo | 1 | 1979-80 T140, 1981-83 All |
51 | 21-7103 | Washer | 1 | 1982-83 All |
51 | 70-1465 | Rocker pipe fibre washer, 5/8 x 7/8 x 1/16 | 1 | 1979-80 T140, 1981 All |
52 | 60-2252 | Pipe clip | 1 | 1979-80 T140, 1981-83 All |
53 | 60-7117 | Detiker clip | 1 | 1979-80 T140, 1981-83 All |
54 | 83-7151 | Spacer | 1 | 1979-80 T140, 1981 All |
54 | 83-7882 | Cap | 1 | 1982-83 All |
55 | 14-0213 | Bolt, 1/4 UNF x 3-1/2 | 1 | 1979-80 T140, 1981-83 All |
56 | 14-1901 | Nut, 1/4 UNF locking nut | 1 | 1979-80 T140, 1981-83 All |
57 | 70-2441 | Washer, 1/4 fibre or copper | 1 | 1979-80 T140, 1981-83 All |
58 | 83-7460 | Spacer 1/2 x 11/16 x 15/32 | 2 | 1980-85 All |
59 | 82-6784 | Grommet | 2 | 1981-83 All (not TSX), ES only |
60 | 83-7884 | Collar | 1 | 1982-83 All |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk