Concentric Carburetter
In order to comply with the new emission regulations then being introduced Amal developed the Concentric carburetter in 1965. This had the float bowl below and concentric to the mixing chamber instead of to one side. The MK II Concentric was a later development of this. Obviously neither of these two were ever originally fitted to Ariels. We stock a full range of spares and new carburetter assemblies, which we can supply with approximate jettings only; they will require final setting up. Please enquire.
Key | Part Number | 600 | Per | 900 | Key |
NI | 622/208 | Gasket set | 1 | 622/208 | NI |
1 | 4/035 | Cable adjuster | 1/2 | 4/035 | 1 |
2 | 5/077 | Cable adjuster lock nut | 2 | 5/077 | 2 |
3 | 622/086 | Screw | 4 | 622/086 | 3 |
4 | 6/132 | Cable ferrule for use with mid-cable adjuster | 1/2 | 6/132 | 4 |
5 | 622/097U | Mixing chamber top for adjuster and ferrule | 1 | 928/097U | 5 |
6 | 622/064 | Standard Carb top | 1 | 928/064 | 6 |
7 | 622/131 | Throttle spring | 1 | 622/131 | 7 |
8 | 622/129 | Choke spring | 1 | 622/129 | 8 |
9 | 622/063 | Throttle needle 2 stroke | 1 | 928/063 | 9 |
9 | 622/124 | Throttle needle 4stroke | 1 | 622/124 | 9 |
10 | 622/062 | Choke slide | 1 | 928/062 | 10 |
11 | 622/060/2 | Throttle slide #2 | 1 | 622/060/2 | 11 |
11 | 622/060/2.5 | Throttle slide #2.5 | 1 | 622/060/2.5 | 11 |
11 | 622/060/3 | Throttle slide #3 | 1 | 622/060/3 | 11 |
11 | 622/060/35 | Throttle slide #3.5 | 1 | 622/060/35 | 11 |
11 | 622/060/4 | Throttle slide #4 | 1 | 622/060/4 | 11 |
12 | Base carburetter body | 1 | 12 | ||
13 | 376/066 | Bell mouth, short alloy | 1 | 928/066 | 13 |
14 | 124/026/20 | Pilot jet #20 | 1 | 124/026/20 | 14 |
14 | 124/026/25 | Pilot jet #25 | 1 | 124/026/25 | 14 |
14 | 124/026/30 | Pilot jet | 1 | 124/026/30 | 14 |
15 | 622/079/105 | 2 Stroke Needle Jet #105 | 1 | 622/079/105 | 15 |
15 | 622/079/106 | 2 Stroke Needle Jet #106 | 1 | 622/079/106 | 15 |
15 | 622/079/107 | 2 Stroke Needle Jet #107 | 1 | 622/079/107 | 15 |
15 | 622/079/108 | 2 Stroke Needle Jet #108 | 1 | 622/079/108 | 15 |
15 | 622/079/109 | 2 Stroke Needle Jet #109 | 1 | 622/079/109 | 15 |
15 | 622/122/105 | Needle jet 4 stroke 105 | 1 | 622/122/105 | 15 |
15 | 622/122/106 | Needle jet 4 stroke 106 | 1 | 622/122/106 | 15 |
15 | 622/122/107 | Needle jet 4 stroke 107 | 1 | 622/122/107 | 15 |
15 | 622/122/108 | Needle jet 4 stroke 108 | 1 | 622/122/108 | 15 |
15 | 622/122/109 | Needle jet 4 stroke 109 | 1 | 622/122/109 | 15 |
16 | 622/128 | Jet holder | 1 | 622/128 | 16 |
17 | Main jet | 1 | 17 | ||
18 | 622/197 | Float needle | 1 | 622/197 | 18 |
19 | 622/069 | Float | 1 | 622/069 | 19 |
20 | 622/073 | Gasket, float chamber | 1 | 622/073 | 20 |
21 | 622/055 | Float bowl .1 seat | 1 | 622/055 | 21 |
22 | 376/093 | Petrol filter | 1 | 376/093 | 22 |
23 | 376/097M | Banjo union, single, push | 1 | 376/097M | 23 |
23 | 376/139 | Double 150 degree banjo | 1 | 376/139 | 23 |
23 | 376/410 | Double banjo 55deg | 1 | 376/410 | 23 |
23 | 376/419 | 180 banjo, push on | 1 | 376/419 | 23 |
23 | 14/175 | Float bowl gland nut washer | 1 | 14/175 | 23 |
24 | 622/078 | Banjo bolt | 1 | 622/078 | 24 |
– | 13/163 | Banjo bolt washer | 1 | 13/163 | – |
25 | 622/071 | Float spindle, | 1 | 622/071 | 25 |
26 | 622/077 | Throttle stop screw | 1 | 622/077 | 26 |
27 | 622/076 | Mixture screw | 1 | 622/076 | 27 |
28 | 622/082 | O ring for adjusting screws | 1 | 622/082 | 28 |
29 | 622/067 | Needle clip | 1 | 622/067 | 29 |
30 | 622/098 | Top Cap | 1 | 622/098 | 30 |
31 | 4/137A | Blanking plug | 1 | 4/137A | 31 |
32 | 622/101 | O ring, flange sealing | 1 | 622/101 | 32 |
33 | 622/134 | Choke guide tube | 1 | 928/103 | 33 |
34 | 622/151 | Washer for plug | 1 | 622/151 | 34 |
35 | 622/147 | Drain plug | 1 | 622/147 | 35 |
36 | 622/074 | Spray tube | 1 | 622/074 | 36 |
37 | 622/075 | Spray tube | 1 | 622/075 | 37 |
38 | Spray tube | – | 928/107 | 38 |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk