E3 Dynamo
Ref | Part No. | Description | Per | Model | Years |
NI | 188614 | Oil seal | 1 | KH | 1948-57 |
NI | 188818 | Split sleeve terminal for connecting wires to dynamo | 2 | All | 1936-58 |
NI | 200380 | Cork washer, between dynamo and crankcase | 1 | FH | 1954-58 |
NI | 200907 | Dynamo drive end fairing (alloy cover) | 1 | Sing | 1958 |
NI | TOOL-34 | Spragging tool for slipping clutch | Sing, 4F, 4G | 1936-58 | |
1 | 103513 | Screw securing dynamo plastic end cap | 1 | All | 1936-58 |
2 | 200609 | Dynamo cover band | 1 | KH | 1948-57 |
2 | 200609 | Dynamo cover band | 1 | Sing, FH | 1950-57 |
3 | 111050 | Screw, clamping commutator end cover band | 1 | All | 1936-57 |
4 | 200609A | Cork sealing strip for 200 609 cover band | 1 | Sing, KH, FH | 1948-57 |
5 | 200826 | Plastic end cap (no fittings see 200 229) E3L | 1 | Sing, KH, FH | 1949-57 |
6 | 200227 | Through bolt with nut, 40 Watt, E3 | 2 | Sing, KH, SQ | 1936-48 |
6 | 200732 | Through bolt with nut E3L | 2 | Sing, KH, FH | 1949-58 |
7 | 200304 | New armature, 40 Watt, E3 | 1 | Sing | 1936-49 |
7 | 200306 | New armature, 40 Watt, E3 | 1 | 4G | 1937-48 |
7 | 200572 | Armature, cost to rewind yours | 1 | KH | 1948 |
7 | 200674 | Armature, cost to rewind yours | 1 | 4F | 1936 |
7 | 200712 | New armature, E3L parallel shaft | 1 | KH | 1949-57 |
7 | 200712-12 | New armature, E3L parallel shaft, 12 volt | 1 | KH | 1949-57 |
7 | 200752 | New armature, E3L Taper shaft | 1 | FH | 1949-58 |
7 | 200752-12 | New armature, E3L Taper shaft 12 volt | 1 | FH | 1949-58 |
7 | 200754 | New armature, E3LM | 1 | Sing | 1950-58 |
7 | 200754-12 | New armature, E3LM, 12 volt | 1 | Sing | 1950-58 |
7 | 200802 | New armature, E3N | 1 | Not Ariel | |
7 | 200802-12 | New armature, E3N 12 Volt | 1 | Not Ariel | |
8 | 189386 | Key for gear | 1 | All | |
9 | 189307 | Bearing, drive end | 1 | All | 1934-58 |
10 | 451385 | Dynamo gear | 1 | MSL/MSR | |
10 | 454495 | Dynamo gear, 22T | 1 | Sing | 1936-58 |
10 | 464269 | Gear | 1 | 4G | 1937-48 |
11 | 188378 | Lockwasher for 111 704 dynamo gear retaining bolt | 1 | Not FH | 1936-58 |
12 | 111704 | Sprocket retaining screw | 1 | Not FH | 1936-58 |
13 | 10352-54 | Sprocket nut, E3L | 1 | FH | 1954-58 |
15 | 200569 | Nut, holding dynamo to magneto (screw is 123 063) | 1/2 | Sing, 4F, 4G | 1936-58 |
16 | 115850 | Screw, bearing housing plate to end bracket, 5BAx7/16 | 2 | Sing | 1936-58 |
16 | 116270 | Screw, bearing plate, 5BAx5/16 (shorten 115850) | 2 | KH | 1948-57 |
17 | 123063 | Screw, dynamo to magneto (nut is 200 569) | 1/2 | Sing, 4F, 4G | 1936-58 |
18 | 116940 | Field coil screw | 1/2 | All | 1936-58 |
19 | 200431 | Dynamo brush plate, clockwise | 1 | Sing | 1936-49 |
19 | 200432 | Dynamo brush plate, anti-clockwise | 1 | KH, 4G | 1936-49 |
19 | 200738 | Dynamo brush plate for use with band type cover, E3L | 1 | Sing, KH, FH | 1936-57 |
19 | 200911 | Dynamo brush plate for 1 piece end cover | 1 | All | 1958 |
20 | 106130 | Screw brush plate to bracket, 6BA | 3 | All | 1936-58 |
21 | 165080 | Nut, terminal post, 4BA | 4 | All | 1936-57 |
21 | 200229 | Terminal post for Bakelite end caps with nuts etc | 2 | All | 1936-57 |
22 | 200522 | Steel cover band with cork and screw, E3 | 1 | Sing, 4G | 1936-48 |
22 | 200522A | Cork sealing strip for 200 522 cover band | 1 | Sing, 4G | 1936-48 |
23 | 103513 | Screw securing dynamo plastic end cap | 1 | All | 1936-58 |
24 | 111050 | Screw, clamping commutator end cover band | 1 | All | 1936-57 |
25 | 200354 | Plastic end cap (no fittings see 200 229) E3 | 1 | Sing, KH, 4G | 1936-48 |
26 | 189210 | Bearing, dynamo, commutator end, 60 Watt | 1 | All | 1949-58 |
26 | 189284 | Bearing, commutator end, E3MD | 1 | 4F | 1936 |
26 | 200231 | Bush, commutator end, 40 Watt, E3 | 1 | Sing, KH, 4G | 1936-48 |
27 | 200290 | Dynamo brushes (pair), 40 Watt, E3 | 1 | Sing, KH, SQ | 1936-48 |
27 | 200737 | Dynamo brushes (pair) E3L | 1 | Sing, KH, FH | 1949-58 |
28 | 200269 | Commutator bearing end bracket, 40 Watt | 1 | Sing | 1936-48 |
28 | 200270 | Commutator bearing end bracket, 40 Watt | 1 | KH, 4G | 1937-48 |
28 | 200713 | Bracket, commutator end, 60 Watt | 1 | Sing/Twins | 1949-57 |
29 | 200188 | Field coil, 40 Watt, E3 | 1 | Sing, KH, SQ | 1936-49 |
29 | 200731 | Field coil, E3L | 1 | Sing, KH, FH | 1949-58 |
30 | 200353 | End bracket, drive end, complete E3HM/E3LM | 1 | Sing | 1936-57 |
30 | 200382 | End bracket, drive end | 1 | FH | 1954-58 |
30 | 200912 | End bracket, drive end | 1 | Sing | 1958 |
31 | 200224 | Bearing retaining nut, drive end | 1 | Sing, FH, 4G | 1936-58 |
31 | 200631 | Sleeve, oil seal | 1 | KH | 1948-57 |
32 | 200262 | Drive end bearing plate (outer part of end bracket) | 1 | Sing | 1936-58 |
32 | 200748 | Drive end casing, triangular outer bit E3L | 1 | KH | 1949-57 |
33 | 200902 | Dynamo end cover, 1 piece type | 1 | Sing | 1958 |
33 | 200918 | Dynamo end cover, 1 piece type | 1 | Twins | 1958 |
34 | 200829A | Rubber cable cover for plastic end caps | 1 | All | 1936-57 |
35 | 460056 | Strap to magneto | 1 | Sing, 4F, 4G | 1936-58 |
36 | 460055 | Dynamo strap trunnion | 2 | Sing, 4F, 4G | 1936-58 |
37 | 460056S | Dynamo strap screw | 2 | Sing, 4F, 4G | 1936-58 |
37 | 460056SQ | Dynamo strap screw, stainless | 2 | Sing, 4F, 4G | 1936-58 |
38 | 200895 | Grommet for wires entering 200 902 1 piece end cover | 1 | All | 1958 |
40 | 200079 | Spring for commutator brush, 40 Watt, E3 | 2 | Sing, KH, 4G | 1936-48 |
40 | 220197 | Brush spring E3L | 2 | All | 1949-58 |
41 | 200908 | Fibre plate with screw, holds wires in brush plate | 1 | All | 1958 |
42 | 200829 | Fibre plate with screw, holds wires in brush plate | 1 | All | 1936-57 |
597 | S17-1 | Split pin | 1 | FH | 1954-58 |
RES117 | Overhaul your Dynamo | 1 |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk