Pre-Unit A Group
Part No | Description | Per | Model | Years |
02-0124 | Camshaft pinion nut | 1 | A | 1954-62 |
02-0449 | Dynamo driving sprocket nut | 1 | A | 1947-62 |
02-2903 | Manual advance/retard gear, retaining washer | 1 | A | 1950-62 |
15-0040 | Half time pinion key | 1 | A | 1947-59 |
19-1429 | Dynamo cork | 1 | A | 1947-62 |
19-1473 | Dynamo driven sprocket nut | 1 | A | 1947-62 |
19-1577 | Lockwasher, dynamo sprocket | 1 | A | 1947-53 |
24-0195 | Manual advance/retard gear, retaining nut | 1 | A | 1950-62 |
24-7000 | Camshaft pinion nut | 1 | A | 1947-53 |
27-1386 | Idler pinion key | 1 | A | 1947-62 |
29-2199 | Dynamo chain (N/A use 67-296 and 67-727) | 1 | A7/ST | 1947-50 |
35-1896 | Camshaft pinion key | 1 | A | 1947-62 |
35-0698 | Dynamo driven sprocket split pin | 1 | A | 1947-62 |
35-4224 | Dynamo driving sprocket lockwasher | 1 | A | 1947-62 |
40-3150 | Half time pinion key | 1 | A | 1960-62 |
67-0057 | Push rod, inlet | 2 | A7/ST | 1947-50 |
67-0058 | Push rod, exhaust | 2 | A7/ST | 1947-50 |
67-0134 | Breather cork 1/8″ thick | AR | A | 1947-62 |
67-0135 | Breather cork 5/32″ thick | AR | A | 1947-62 |
67-0137 | Breather cork 3/32″ thick | AR | A | 1947-62 |
67-0137A | Breather cork 7/32″ thick | AR | A | 1947-62 |
67-0286 | Idler pinion bush, outer | 1 | A | 1950-62 |
67-0296 | Dynamo chain | 1 | A | 1950-62 |
67-0332 | Cam follower, inlet | 2 | A | 1950-62 |
67-0333 | Cam follower, exhaust | 2 | A | 1950-62 |
67-0334 | Camshaft (EXCHANGE) | 1 | A7/10 | 1950-59 |
67-0335 | Idler pinion and spindle | 1 | A | 1950-62 |
67-0337 | Camshaft pinion | 1 | A | 1950-62 |
67-0339 | Half time pinion | 1 | A | 1950-62 |
67-0356 | Camshaft (EXCHANGE) | 1 | A7/SS/10 | 1960-62 |
67-0356 | Camshaft (EXCHANGE) | 1 | A7ST/SS/10RR/SR | 1952-59 |
67-0357 | Camshaft (EXCHANGE) | 1 | A10SR/RGS | 1960-63 |
67-0357 | Camshaft (EXCHANGE) | 1 | A10Spitfire | 1958-63 |
67-0360 | Push rod, inlet, improved quality, correct length and radius | 2 | A10 | 1950-62 |
67-0362 | Push rod, exhaust, improved quality, correct length and radius | 2 | A10 | 1950-62 |
67-0396 | Push rod, inlet, improved quality, correct length and radius | 2 | A7SS | 1951-62 |
67-0398 | Push rod, exhaust, improved quality, correct length and radius | 2 | A7SS | 1951-62 |
67-0540 | Manual advance/retard gear, (Duralamin) | 1 | A | 1950-62 |
67-0641 | Half time pinion | 1 | A7 | 1947-50 |
67-0642 | Oil pump worm drive gear | 1 | A | 1947-62 |
67-0643 | Half time pinion lock nut, left hand thread | 1 | A | 1947-62 |
67-0644 | Half time pinion lockwasher | 1 | A | 1947-62 |
67-0645 | Oil pump gear washer | 1 | A | 1947-62 |
67-0685 | Camshaft pinion lockwasher | 1 | A | 1947-62 |
67-0686 | Camshaft bush | 2 | A | 1947-50 |
67-0686 | Camshaft bush | 3 | A | 1950-62 |
67-0686 | Idler pinion bush, inner | 1 | A | 1947-62 |
67-0687 | Camshaft bush, drive side | 1 | A | 1947-50 |
67-0690 | Camshaft used before engine number XA7 600, reground to order | 1 | A | 1947 |
67-0695 | Camshaft fitted after engine number XA7 600, reground to order | 1 | A | 1947-49 |
67-0707 | Idler pinion spindle – see 67-335 | 1 | A | 1947-62 |
67-0708 | Idler pinion oil seal | 1 | A | 1947-62 |
67-0709 | Idler pinion bush, outer | 1 | A | 1947-49 |
67-0713 | Rev counter drive nut on magneto | 1 | A10RR | 1954-57 |
67-0721 | Dynamo driving sprocket | 1 | A | 1947-62 |
67-0725 | Dynamo sprocket 13T (N/A use 67-727) | 1 | A7/ST | 1947-50 |
67-0727 | Dynamo driven sprocket 11T | 1 | A | 1950-62 |
67-0729 | Dynamo driven sprocket lockwasher | 1 | A | 1954-62 |
67-0987 | Crankcase breather | 1 | A | 1950-62 |
67-1021 | Inlet tappet guide | 2 | A7 | 1947-51 |
67-1022 | Exhaust tappet guide | 2 | A7 | 1947-51 |
67-1024F | Cam follower (exchange) | 4 | A7/ST | 1947-50 |
67-1882 | Automatic advance/retard replacement Dural gear wheel & rivets | 1 | K2F | 1954-62 |
67-1882F | Auto advance unit EXCHANGE | 1 | K2F | 1954-62 |
No products were found matching your selection, but we still might be able to help! Give us a call on 01986 894798 or email spares@draganfly.co.uk