Prop, centre and rear stands

The first A7 models had a vertically mounted telescopic centre stand, which was not a success and was replaced with a more conventional version from frame number XA7 1101. The C group centre stands pivot on engine or footrest studs.

Side, prop or jiffy stands were available as an option from at least 1938. All models that had a side stand fitted used a loose 2 piece clamp to fix it to the frame, but when the swinging arm frame was introduced the top half of the clamp was attached to the frame. The exception (there is always an exception) is the 1953-57 plunger A10, which had a welded on bracket. The C10L did not have provision for a side stand.

The rigid M group used a rear stand but the plunger had a conventional centre stand.

Part No	Description	Per	Model	Years
Centre Stand – A Group– Plunger/Rigid
28-2080	Centre stand pivot grease nipple	2	A Plun	1947-57
30-0733	Washer for centre stand bolt	2	A Plun	1947-57
30-0733Q	Washer for centre stand bolt – stainless	2	A Plun	1947-57
35-0698	Centre stand pivot split pin	2	A Plun	1947-57
67-4816U	Centre stand	1	A Plun	1952-57
67-4843U	Centre stand (fitted from XA7 1101)	1	A Plun	1947-51
67-4847	Centre stand spring	1	A Plun	1947-57
67-4848	Centre stand pivot	2	A Plun	1947-57
Centre stand – A/B Group S’arm
02-1945	Plain washer	1	A/B S’arm	1954-57
02-1967	Spring washer	1	A/B S’arm	1954-57
03-1346	Thackery washer	1	A/B S’arm	1958-62
24-5860	Centre stand pivot bolt nut	2	A/B S’arm	1954-57
28-2080	Grease nipple	1/2	A/B S’arm	1954-62
35-0707	Split pin	2	A/B S’arm	1958-62
40-3075	Rubber for centre stand extension	1	A except Spitfire	1960-63
42-4713	Centre stand pivot tube	1	A/B S’arm	1954-57
42-4714	Pivot stud	1	A/B S’arm	1954-57
42-4719	Centre stand	1	B S’arm	1954-57
42-4725	Centre stand	1	A S’arm	1954-57
42-4730	Centre stand spring	1	A/B S’arm	1954-62
42-4736	Centre stand, not available – use 42-4761 with 40-3075	1	A/B S’arm	1958-60
42-4744	Centre stand pivot pin	1	A/B S’arm	1958-62
42-4761	Centre stand, with extension	1	A except Spitfire	1960-63
42-4762	Centre stand without extension	1	A Spitfire	1960-63
42-4745	Centre stand pivot pin tube	1	A/B S’arm	1958-62
Centre Stand – B/M Group Rigid and Plunger and C Group except C10L
02-1925	Centre stand stud nut	2	B/M Rig/Plun/C12	1946-62
02-1967	Centre stand spring washer	2	B/M Rig/Plun	1946-62
15-0645	Stop bolt	1	C10/11	1949-53
15-0716	Pivot stud spring washer	2	C12	1956-58
15-5290	Centre stand pivot grease nipple	1	C10/11 Gir	1946
15-5290	Centre stand pivot grease nipple	1	C11G	1954-55
28-2080	Centre stand pivot grease nipple	1	B Rig/Plun/C12	1946-56
29-4387	Centre stand spacer	1	C11G Plun	1954-55
29-4568	Distance piece	1	C12	1956-58
29-4840	Centre stand pivot tube	1	B Rig/Plun	1946-56
29-4840	Centre stand pivot tube	1	C10 Std	1938-39
29-4840	Centre stand pivot tube (Rigid only 1954)	1	C10/11/11G Rig	1940-55
35-5016	Centre stand pivot grease nipple, angled	1	C10/11/M Plun	1946-62
65-4727	Centre stand spring	1	B/M Rig/Plun/C except C10L	1946-62
65-4728	Centre stand stud	1	B Rig/Plun	1946-56
Centre Stand – C10L
35-0705	Split pin for link plate	1	C10L	1954-57
02-2138	Plain washer for link plate	1	C10L	1954-57
90-4716	Link plate	1	C10L	1954-57
Side Stand – All Models
02-0049	Side stand clamp nut	2	M	1946-62
02-1945	Side stand pivot washer	1	A/B	1948-57
03-1156	Side stand clamp bolt	2	B S’arm	1956-57
28-2338	Side stand clamp bolt	2	B S’arm	1954-55
28-2338	Side stand clamp bolt	2	B Plun/Rig/C (not C12)	1946-60
36-0382	Side stand clamp shake proof washer	2	A S’arm	1954-62
36-0382	Side stand clamp shake proof washer	2	B/M/C	1946-60
42-4765	Side stand leg, use 42-4769 assembly	1	A S’arm	1954-62
42-4767	Side stand clamp bolt	2	A S’arm	1960-62
42-4769	Side stand assembly after CA7 2735	1	A/B S’arm	1954-59
42-4772	Side stand leg	1	A S’arm	1954-59
42-4793	Side stand pivot bolt	1	A S’arm	1955-62
42-4793	Side stand pivot bolt	1	B S’arm	1958-60
42-4796	Side stand clamp bolt	2	A S’arm	1954-59
42-4796	Side stand clamp bolt	2	B S’arm	1958-60
42-4797	Side stand clamp nut	2	A/B S’arm	1954-62
65-4741	Side stand pivot pin	1	B/C/M Rig/Plun	1946-57
65-4742	Side stand spring	1	A/B/C/M	1948-62
65-4784	Side stand clamp bolt	2	M	1946-62
67-4907	Side stand pivot pin	1	A Plun	1951-57
67-4907	Side stand pivot pin	1	A S’arm	1954
67-4907	Side stand pivot pin	1	B S’arm	1954-57
M Group Rear Stand
15-0716	Rear stand pivot bolt spring washer	2	M	1940-60
24-6040	Rear stand pivot bolt nut	2	M	1940-60
24-6058	Rear stand pivot bolt	2	M	1940-60
24-6058A	Pivot bolt, special for our rear stands	2	WM20	1940-45
66-4767	Rear stand spring	1	B/M	1937-60
66-4772	Rear Stand with pivot bolts	1	M	1940-60
WM20 Field Stand
15-6053	Field stand pivot bolt	1	WM20	1940-45
66-4710	Field stand assembly, this one fits and works	1	WM20	1940-45
15-6045	Field stand half clamp, threaded	1	WM20	1940-45
15-6046	Field clamp half clamp, not threaded	1	WM20	1940-45
15-6052	Field stand spring inside pivot	1	WM20	1940-45
15-6056	Field stand pivot pin collar	1	WM20	1940-45
31-4197	Field stand clip	1	WM20	1940-45
Other Models
PA-35	Universal clamp on side stand for 7/8” tube, uprated